Minimal weight. Minimal windage. Maximum reliability. Navtec standard cylinder rods are made from 316 stainless steel. Tubes, lower clevis and caps are made of black hard-coated aluminum. Cylinder bores are specially polished for longer seal life. Navtec stainless steel cylinders represent the highest standard of performance worldwide, with 316 stainless construction throughout. Standard, Long, and Flattening Reef versions are available. Titanium componentry optional.

CYLINDER SIZE   -6 -10 -12 -17 -22 -30 -40 -48 -60 -76 -90 -110 -150

MAX PULL FORCE @ RELIEF lbs kg 3,200 1,450 5,800 2,630 7,600 3,450 10,900 4,940 13,900 6,300 22,100 10,020 32,200 14,610 32,200 14,610 42,900 19,460 42,900 19,460 57,700 26,170 73,200 33,200 90,600 41,100

BODY DIAMETER in mm 1.32 33.5 1.66 42.2 2.00 50.8 2.25 57.2 2.50 63.5 3.25 82.6 4.00 101.6 4.00 101.6 4.50 114.3 4.50 114.3 5.50 139.7 6.00 152.4 7.00 177.8

rod thread unf 2a 7/16-20 1/2-20 5/8-18 5/8-18 3/4-16 7/8-14 1-12 1-12 1 1/4-12 1 1/4-12 1 1/4-12 1 3/8-12 1 1/2-12

CLEVIS PIN & GAP in mm 7/16 11.1 1/2 12.7 5/8 15.9 5/8 15.9 3/4 19.1 7/8 22.2 1 25.4 1 1/8 28.6 1 1/4 31.8 SEE NOTE * 1 3/8 34.9 1 1/2 38.1 1 3/4 44.5

Max relief setting is 5,000 psi.

PART NUMBER   A250-SE-006 A250-LE-006 A250-FE-006 A250-SE-010 A250-LE-010 A250-FE-010 A250-SE-012 A250-LE-012 A250-FE-012 A250-SE-017 A250-LE-017 A250-FE-017 A250-SE-022 A250-LE-022 A250-FE-022 A250-SE-030 A250-LE-030 A250-FE-030 A250-SE-040 A250-LE-040 A250-FE-040 A250-SE-048 A250-LE-048 A250-SE-060 A250-LE-060 A250-SE-076 A250-LE-076 A250-SE-090 A250-LE-090 A250-SE-110 A250-LE-110 A250-SE-150 A250-LE-150

STROKE in mm 9.0 229 13.5 343 20.2 513 9.0 229 13.5 343 20.0 509 9.5 241 14.2 361 24.1 611 9.5 241 14.2 361 30.0 763 10.0 254 15.0 381 35.0 890 11.0 279 16.5 419 40.0 1016 12.0 305 18.0 457 45.2 1148 12.0 305 18.0 457 13.9 353 21.0 533 15.0 381 22.5 572 16.0 406 24.0 609 18.0 457 27.0 686 18.0 457 27.0 686

LENGTH CLOSED in mm 18.7 474 23.2 589 29.9 759 19.5 495 24.0 609 31.1 789 21.1 536 25.8 656 36.1 916 21.2 539 25.9 659 42.9 1090 23.2 589 28.2 717 49.4 1255 26.6 675 32.1 814 56.4 1433 28.6 726 34.6 879 63.2 1606 28.8 733 34.8 885 32.5 827 39.7 1007 34.0 863 41.5 1054 36.1 917 44.1 1120 40.2 1022 49.2 1250 41.7 1060 50.7 1288

WEIGHT STD ALUMINUM lbs kg 1.9 0.86 2.3 1.04 3.2 1.44 2.7 1.24 3.3 1.49 5.0 2.27 4.4 2.01 5.6 2.54 8.6 3.92 5.1 2.31 6.3 2.84 10.7 4.87 7.2 3.26 8.6 3.89 15.4 6.99 12.6 5.71 15.4 6.98 30.0 13.61 20.3 9.22 24.8 11.26 44.0 19.96 20.9 9.48 25.4 11.52 33.0 14.97 38.0 17.24 35.8 16.24 42.9 19.46 50.0 22.68 61.4 27.85 67.5 30.62 82.0 37.19 97.5 44.23 117.0 53.07

SE = standard cylinder, LE = long cylinder, FE = fl attening reef cylinder. For stainless steel option, add (S) to end of any above part number. Example: A250SSE-010. Nutted pins standard -60 and above, nutted pins available on smaller sizes. Other custom cylinder confi gurations available. * PIN = 1 1/4 (31.8mm), GAP = 1 5/16 (33.3mm).